This website is privately owned and is not affiliated with any government agency.

Road Test Offices in Philo, Ohio

Road Test Offices in Philo, Ohio



Road Test offices in Philo, Ohio

Licking County Driver Exam Station

873 E. Main St., 43055

(877) 439-8378



Office details

Deputy Registrar License Agency

875 E. Main St., 43055

(740) 345-0066



Office details

Deputy Registrar License Agency

1002 East State. St., Suite 21, 45701

(740) 592-4667



Office details

Marietta Driver Exam Station

142 Gross St., Suite A, 45750

(877) 439-8378



Office details

Driver Exam Station

980 Liberty Dr., Suite 200, 43130

(877) 439-8378



Office details

Deputy Registrar License Agency

980 Liberty Drive, Suite 500, 43130

(740) 653-2478



Office details

Deputy Registrar License Agency

671 N. Sandusky St., 43050

(740) 392-5641



Office details

Driver Exam Station

1260 Monroe St., N.W. Suite 9E, 44663

(877) 439-8378



Office details

Deputy Registrar License Agency

538 N. Main St., Suite D, 43907

(740) 942-8200



Office details

Columbus Driver Exam Station

990 Morse Rd., 43229

(614) 995-5353



Office details

DMV Ohio



Other services in Philo, Ohio:


Search Road Test offices in Muskingum (OH) by city


Search Road Test offices in Ohio by county


Search Road Test offices by state



Tips for a perfect drivers license road test in Philo:

If you go to take your driver's test and your a car Enthusiast, this will be one of the most exciting days of your life and, if you're not, it opens up a world of possibilities for traveling and do things you never could have done before.

If you follow these few simple tips you'll be well on your way and you'll pass it with flying colors.

About mirrors

Before leaving the parking lot and getting out on the road is important to adjust your mirrors, your seat position, steering wheel position and of course fasten your seatbelt.

Proper 9 and 3 hand position

It's important to keep both hands on the steering wheel at all times. Of course if you have a manual transmission vehicle you have to take one hand off the ship, but this will keep your test administrator feeling safe and you will be in the most control of your vehicle. Proper hand position is at 9 and 3, and i guarantee if you drive one-handed at the 12 position you're going to fail your test.

When changing lanes

When changing lanes is important to do the following: First Signal, then look in your rearview mirror all by your side mirror, look over your shoulder, and if is safe, then you can go. Once you're in the lane that you're moving into all the way, then you can turn your turn indicator. Always signal if you're changing lanes no matter if there's no traffic around you, for the driver's test it is important to check both mirrors, look over your shoulder and use your turn signal.

When changing more than 1 lanes at the same time

Now if you're going over multiple Lanes ( For example you're on a four-lane road ) always go from one lane to the next, pause for a little bit, then turn your turning indicator on, look at both mirrors over shoulder, go to the next line, pause and then go to the next. Shooting over across 4 Lanes of traffic is a good way to fail the test.

Pulling out onto a street with a high speed limit

Always give yourself plenty of time when pulling out onto a street with a high speed limit. It will not annoy the person providing your test if you wait there until it's safe.

If you pull out in front of a car that is moving quickly and do not give yourself enough room you're going to lose points. Waiting until there's plenty of space, more so than you think you would need normally, it is the proper way to do it.

Fear to one side of the lane

Often beginner drivers tend of fear to one side of the lane or the other. On a single Lane road that means you might been too close to the double yellow or too close to the shoulder. If you need to prevent this there is a technique that you can used that is really helpful when you're learning, is to look farther ahead in the road and try to imagine the center of the road, picture a line in the center of the lane you're in passing through the center of your vehicle. This helps keep you in the center of your lane which is important for succeeding at the driver's test.

When coming to a stop sign

When coming to a stop sign or an stop or red light is extremly important to stop before the white line in the road. That mean, when you're coming to a full stop, you should still be able to see the white line in front of the hood of your car. Then, if it's a blind turn, once you come to a full start, now you can start creeping out a little bit further and further so you can see the flow of traffic and make your right or left turn.

Always use a safe following distance between yourself and the car is in front of you. The higher the speed limit is, the more the following distance because, if the person in front of you breaks all the sudden, you want to give yourself enough time to react.

On braking

Before you break, always check your mirrors. If you come onto a stop abruptly and there's a car right behind you, they could run into you. If it's an emergency situation this obviously isn't always possible, but in the ideal case always check your rearview mirror before braking.

Keep your eyes always in movement

Always keep your eyes moving. that means constantly scanning the road for pedestrian, any obstacles or turns that are coming up that means checking your mirrors constantly ( Your rearview mirror, your side mirrors, looking over your shoulder, etc ). Being attentive and showing that you're paying attention is going to go a long way to pass your driver's test.

Cut corners tip

When making protective left turns people often cut corners. Is something that everyone does on the road all the time: passing over a double yellow or a white line is a great way to fail your driver's test so make sure to take it wide enough, stay in the guidelines when you're making left turns and not cut any corners.

Be as smooth as possible

Always be as smooth as possible. It means smooth braking, smooth steering inputs, smooth acceleration, etc. Being jerky is not going to go well.

Dont be aggressive

Drive defensively not aggressively. This day is about proving that you are a safe driver.

Check the speed limit

Don't speed. This is very important. In general people are used to going 5 miles an hour over the speed limit or so when driving in a daily situation but for the test you cannot do that. Speed limit or below is required.

Also having a radar detector in your car for the test if won't be a great idea.

Pre-drive test checklist:

The DMV wants to make sure that you are proficient with all the controls on the inside the car before you start your test.

Here's one sample of a pre-drive checklist:

  • The DMV will tell you to turn the car on, but don't start it.
  • Turn the turn signal on to the left and then the right.
  • Turn the headlights on and off.
  • Turn the windshield wipers on and off.
  • Turn on the emergency flashers in the morning.
  • The examiner may ask you, if you come out in the morning and there's frost on your front window, how do you defrost your front window? You selected froster, turn the fan on and select the “Heat”.
  • Any other examiner will ask you to show them your defrosters: Where are they located?
  • The examiner will then ask you to disengage the emergency parking brake and then, engage the emergency parking brake.
  • They make ask you to honk the horn.

This website is privately owned and is not affiliated with any government agency. Remember that we are never going to solicit any personal information, ID or credentials. To find a list of official websites, please click here


Search DMV offices by service


© 2024 dmvnearme.net - This website is privately owned and is not affiliated with any government agency. Official DMV links